for price, delivery, and to place orders, please contact hittite microwave corporation: 20 alpha road, chelmsford, ma 01824 phone: 978-250-3343 fax: 978-250-3373 order on-line at www.hittite.com low noise amplifiers - smt 8 8 - 230 hmc605lp3 / 605lp3e gaas phemt mmic low noise amplifier w/ bypass mode, 2.3 - 2.7 ghz v03.0809 general description features functional diagram the hmc605lp3 / hmc605lp3e are versatile, high dynamic range gaas mmic low noise amplifi ers that integrate a low loss lna bypass path on the ic. the amplifi er is ideal for wibro & wimax receivers oper- ating between 2.3 and 2.7 ghz and provides 1.1 db noise fi gure, 20 db of gain and +31 dbm output ip3 from a single supply of +5v @ 74 ma. input and out- put return losses are 14 and 15 db respectively with no external matching components required. a single control line (vctl) is used to switch between lna mode and a low 2 db loss bypass mode and reduces the current consumption to 10 a. the hmc605lp3 is failsafe and will default to the bypass mode with no dc power applied. noise figure: 1.1 db output ip3: +31 dbm gain: 20 db low loss & failsafe bypass path single supply: +3v or +5v 50 ohm matched input / output electrical specifi cations, t a = +25 c, vdd = +5v typical applications the hmc605lp3 / hmc605lp3e is ideal for: ? wireless infrastructure ? customer premise equipment ? fixed wireless ? wimax & wibro ? tower mounted amplifi ers parameter lna mode bypass mode units min. typ. max. min. typ. max. frequency range 2.3 - 2.7 2.3 - 2.7 ghz gain 17.5 20.5 -3.0 -2.0 db gain variation over temperature 0.012 0.002 db / c noise figure 1.1 1.3 db input return loss 14 13 db output return loss 15 13 db reverse isolation 33 db output power for 1db compression (p1db)* 17 16 dbm output third order intercept (ip3)* (-20 dbm input power per tone, 1 mhz tone spacing) 31 dbm supply current (idd) 74 90 0.01 ma swtiching speed lna mode to bypass mode - 6.0 ns bypass mode to lna mode 60 - ns * p1db for lna mode is referenced to rfout while p1db for bypass mode is referenced to rfin.
for price, delivery, and to place orders, please contact hittite microwave corporation: 20 alpha road, chelmsford, ma 01824 phone: 978-250-3343 fax: 978-250-3373 order on-line at www.hittite.com low noise amplifiers - smt 8 8 - 231 lna broadband gain & return loss lna gain vs. temperature lna noise figure vs. temperature lna C gain, noise figure & power vs. supply voltage @ 2.5 ghz lna gain vs. vdd lna noise figure vs. vdd -40 -30 -20 -10 0 10 20 30 123456 s21 s11 s22 response (db) frequency (ghz) 14 16 18 20 22 24 2.3 2.4 2.5 2.6 2.7 +25c +85c -40c gain (db) frequency (ghz) 14 16 18 20 22 24 2.3 2.4 2.5 2.6 2.7 +3v +5v gain (db) frequency (ghz) 0 0.4 0.8 1.2 1.6 2.3 2.4 2.5 2.6 2.7 +25c -40c +85c noise figure (db) frequency (ghz) 0.5 0.7 0.9 1.1 1.3 1.5 2.3 2.4 2.5 2.6 2.7 3v 5v noise figure (dbm) frequency (ghz) 0 5 10 15 20 25 0 0.5 1 1.5 2 2.5 3 3.5 4 4.5 5 gain p1db noise figure gain (db), p1db (dbm) noise figure (db) vdd ( vdc ) hmc605lp3 / 605lp3e v03.0809 gaas phemt mmic low noise amplifier w/ bypass mode, 2.3 - 2.7 ghz
for price, delivery, and to place orders, please contact hittite microwave corporation: 20 alpha road, chelmsford, ma 01824 phone: 978-250-3343 fax: 978-250-3373 order on-line at www.hittite.com low noise amplifiers - smt 8 8 - 232 lna output ip3 vs. temperature lna psat vs. temperature lna output ip3 vs. vdd lna input return loss vs. temperature lna output return loss vs. temperature 14 16 18 20 22 24 2.3 2.4 2.5 2.6 2.7 +25c +85c -40c psat (dbm) frequency (ghz) 25 27 29 31 33 35 2.3 2.3 2.4 2.5 2.5 2.5 2.6 2.6 2.7 +25c -40c +85c ip3 (dbm) frequency (ghz) -30 -25 -20 -15 -10 -5 0 2.3 2.3 2.4 2.5 2.5 2.5 2.6 2.6 2.7 +25c +85c -40c return loss (db) frequency (ghz) -30 -25 -20 -15 -10 -5 0 2.3 2.3 2.4 2.5 2.5 2.5 2.6 2.6 2.7 +25c +85c -40c return loss (db) frequency (ghz) 10 15 20 25 30 35 40 2.3 2.3 2.4 2.5 2.5 2.5 2.6 2.6 2.7 +3v +5v ip3 (dbm) frequency (ghz) lna output p1db vs. temperature 14 16 18 20 22 24 2.3 2.4 2.5 2.6 2.7 +25c +85c -40c p1db (dbm) frequency (ghz) hmc605lp3 / 605lp3e v03.0809 gaas phemt mmic low noise amplifier w/ bypass mode, 2.3 - 2.7 ghz
for price, delivery, and to place orders, please contact hittite microwave corporation: 20 alpha road, chelmsford, ma 01824 phone: 978-250-3343 fax: 978-250-3373 order on-line at www.hittite.com low noise amplifiers - smt 8 8 - 233 bypass mode insertion loss vs. temperature bypass mode input return loss vs. temperature bypass mode output return loss vs. temperature bypass mode broadband insertion loss & return loss lna reverse isolation vs. temperature lna output p1db vs. vdd 0 4 8 12 16 20 2.3 2.4 2.5 2.6 2.7 +3v +5v p1db (dbm) frequency (ghz) -30 -25 -20 -15 -10 -5 0 2.3 2.3 2.4 2.5 2.5 2.5 2.6 2.6 2.7 +25c +85c -40c return loss (db) frequency (ghz) -30 -25 -20 -15 -10 -5 0 2.3 2.3 2.4 2.5 2.5 2.5 2.6 2.6 2.7 +25c +85c -40c return loss (db) frequency (ghz) -40 -30 -20 -10 0 123456 s21 s11 s22 response (db) frequency (ghz) -40 -30 -20 -10 0 2.3 2.4 2.5 2.6 2.7 +25c +85c -40c isolation (db) frequency (ghz) -5 -4 -3 -2 -1 0 2.3 2.4 2.5 2.6 2.7 +25c +85c -40c insertion loss (db) frequency (ghz) hmc605lp3 / 605lp3e v03.0809 gaas phemt mmic low noise amplifier w/ bypass mode, 2.3 - 2.7 ghz
for price, delivery, and to place orders, please contact hittite microwave corporation: 20 alpha road, chelmsford, ma 01824 phone: 978-250-3343 fax: 978-250-3373 order on-line at www.hittite.com low noise amplifiers - smt 8 8 - 234 typical supply current vs. vdd vdd (vdc) idd (ma) +5 74 +3 28 drain bias voltage (vdd) +8 vdc rf input power (rfin) (vdd = +5.0 vdc) lna mode bypass mode +15 dbm +30 dbm channel temperature 150 c continuous pdiss (t = 85 c) (derate 13.7 mw/c above 85 c) 890 mw thermal resistance (channel to ground paddle) 73 c/w storage temperature -65 to +150 c operating temperature -40 to +85 c absolute maximum ratings outline drawing notes: 1. leadframe material: copper alloy 2. dimensions are in inches [millimeters] 3. lead spacing tolerance is non-cumulative 4. pad burr length shall be 0.15mm maximum. pad burr height shall be 0.05mm maximum. 5. package warp shall not exceed 0.05mm. 6. all ground leads and ground paddle must be soldered to pcb rf ground. 7. refer to hittite application note for suggested land pattern. lna mode vctl = vdd 0.3v bypass mode vctl= 0v 0.3v truth table part number package body material lead finish msl rating package marking [3] hmc605lp3 low stress injection molded plastic sn/pb solder msl1 [1] 605 xxxx hmc605lp3e rohs-compliant low stress injection molded plastic 100% matte sn msl1 [2] 605 xxxx [1] max peak refl ow temperature of 235 c [2] max peak refl ow temperature of 260 c [3] 4-digit lot number xxxx package information electrostatic sensitive device observe handling precautions hmc605lp3 / 605lp3e v03.0809 gaas phemt mmic low noise amplifier w/ bypass mode, 2.3 - 2.7 ghz
for price, delivery, and to place orders, please contact hittite microwave corporation: 20 alpha road, chelmsford, ma 01824 phone: 978-250-3343 fax: 978-250-3373 order on-line at www.hittite.com low noise amplifiers - smt 8 8 - 235 pin descriptions pin number function description interface schematic 1, 2, 5, 6, 8, 12, 13 n/c no connection necessary. these pins may be connected to rf/dc ground. 3rfin this pin is ac coupled and matched to 50 ohms. see application circuit. 4, 7, 9, 11, 15 gnd these pins must be connected to rf/dc ground. 10 rfout this pin is ac coupled and matched to 50 ohms. 14 vdd power supply voltage. bypass capacitors are required. see application circuit. 16 vctl mode control voltage. see truth table. application circuit components value c1, c2 100pf c3 10kpf hmc605lp3 / 605lp3e v03.0809 gaas phemt mmic low noise amplifier w/ bypass mode, 2.3 - 2.7 ghz
for price, delivery, and to place orders, please contact hittite microwave corporation: 20 alpha road, chelmsford, ma 01824 phone: 978-250-3343 fax: 978-250-3373 order on-line at www.hittite.com low noise amplifiers - smt 8 8 - 236 item description j1 - j2 pcb mount sma rf connector j3 - j6 dc pin c1, c2 100 pf capacitor, 0402 pkg. c3 10 kpf capacitor, 0402 pkg. u1 hmc605lp3 / hmc605lp3e amplifi er pcb [2] 117158 evaluation board [1] reference this number when ordering complete evaluation pcb [2] circuit board material: rogers 4350 or arlon 25fr evaluation pcb the circuit board used in the fi nal application should use rf circuit design techniques. signal lines should have 50 ohm impedance while the package ground leads and exposed paddle should be con- nected directly to the ground plane similar to that shown. a sufficient number of via holes should be used to connect the top and bottom ground planes. the evaluation circuit board shown is available from hittite upon request. list of materials for evaluation pcb 117160 [1] hmc605lp3 / 605lp3e v03.0809 gaas phemt mmic low noise amplifier w/ bypass mode, 2.3 - 2.7 ghz
for price, delivery, and to place orders, please contact hittite microwave corporation: 20 alpha road, chelmsford, ma 01824 phone: 978-250-3343 fax: 978-250-3373 order on-line at www.hittite.com low noise amplifiers - smt 8 8 - 237 notes: hmc605lp3 / 605lp3e v03.0809 gaas phemt mmic low noise amplifier w/ bypass mode, 2.3 - 2.7 ghz
|
